Pyrenees sandstone with a diameter of 21.5 inch compatible for Horl roller grinders

• Pyrenees sandstone with a diameter of 21.5 inch compatible for Horl roller grinders

NEW - Pyrenees sandstone grinding wheel for roller grinders
After many inquiries from ambitious knife fans, we now have grinding wheels
For roller grinders with an M6 thread mount, equipped with our proven natural stones,
which many are already familiar with from our effective bench stones.

The discs have an exceptionally large and effective grinding surface with one
diameter of 2.15 inch and sit on a massive stainless steel support with M6 thread, which is made of full V2A steel.

The rough one
The Pyrenees stone, a French sandstone, is primarily used with 1200 grit the pre-sharpening and reaching the sharpening
angle that is already specified by the knife holder of the roller grinder - these are usually 15 ° and 20 °.

If you have pre-sanded with even coarser materials, which can sometimes save time with larger changes to the sanding angle,
you can use the Pyrenees stone a significantly finer cut without deep grooves and prepares the knife for the next step with the finer slices.
It can also be used to repair minor damage to the blade.

The application
The Pyrenees sandstone is a water stone that does not have to be watered for long
as you know from the often softly bound artificial stones.
All you have to do is wet it with a little water and you're ready to go.
This prevents the blade from overheating when sharpening, which is the
can cause considerable damage to valuable knives. The Pyrenean stone gives
a better result when rubbed.

Note:
The natural stones are made by hand by us and there can be minor ones
There are differences in thickness and grain that result from the raw material.

Scope of delivery:
1 x grinding wheel with Pyrenees stone (thickness> 0.35 inch) - grain 1200
1 x Pyrenees slurry stone 
1 x storage box
1 x Certificate of Authenticity

Mother nature can do some things better.